Minwax Antique Oil Finish Vs Wipe On Poly

As i see it the pros of the poly are hardness and durability but it looks too much like plastic. This finish is a blend of boiled linseed oil and varnish so you get the benefits of both at the same time.

A Tip For Cherrywood Minwax Blog

minwax antique oil finish vs wipe on poly

minwax antique oil finish vs wipe on poly is important information with HD images sourced from all the best websites in the world. You can access all contents by clicking the download button. If want a higher resolution you can find it on Google Images.

Note: Copyright of all images in minwax antique oil finish vs wipe on poly content depends on the source site. We hope you do not use it for commercial purposes.

Bloxygen is an excellent way to preserve your finishes and make sure you use every last drop.

Minwax antique oil finish vs wipe on poly. Wipe or brush on a generous coat of minwax antique oil finish. Here i discuss the difference or rather the lack of difference between different oil finishes. Special thanks to bloxygen for sponsoring this episode and providing me with a couple of cans for free.

Pure boiled linseed oil and minwax fast drying polyurethane a brushing finish were added for comparison. Minwax wipe on poly is a durable clear polyurethane that provides protection with classic hand rubbed beauty. First few coats i thin downs omethen start using 400 600 grit wet paer on it while still wet.

The author tested 15 wipe on finishes including a water based finish and both tung oil and linseed oil based finishes. Up to this time i used blo truoil watco danish oil and minwax wipe on poly. Ive used antique oil 4 projects recently and could not be happier.

It is a tung oil urethane finish wipe on. All the finishes were tested on pieces of red oak plywood cut from the same sheet. Applied with a cloth no need to worry about drips and brush marks.

Minwax wipe on poly is the perfect oil based clear protective finish for your interior wood. In a nutshell the biggest difference is on the label. The tung oil finish is really a mixture of tung oil and varnish.

Minwax wipe on poly is applied with a cloth that avoids drips and brush marks. After letting it dry for a few days i want to apply a surface of either 1 minwaxs tung oil finish or 2 wipe on poly urethane. Apply in the direction of the wood grain.

On the first coat the oil sinks in for warm lustrous look that really amplifies figured wood. Apply minwax wood finish stain if desired following the label directions. When that coat dries sand lightly with 320 or 400 grit just enough to knock down the roughness of the varnish.

I use a product called arm r seal made by general. Let sit on wood for approximately 5 10 minutes then buff evenly with a clean lint free cloth. Next coat will be 12 linseed oil and 12 golden oak.

For me i prefer formbys tung oil finishbut i have tried watco danish oil teak oil finish and several other oil finishes. Minwax wipe on poly is a durable clear finish that combines polyurethane protection with classic hand rubbed beauty. Great for furniture railings and trim.

Like you i found truoil to be too plasticglassy looking for my taste and watco is on the other end of the spectrum. Be sure the stain has dried completely before applying the finish.

Minwax Antique Oil Finish Finewoodworking